SDK v0.1 · read-only

Protocol overview (level 1)

ภาษาไทย

Level-1 K-Line: 10400 8N1, wake, session, checksum, live tables, and fault-code reads.

Full rules: kline, live, dtc.

Wire

  • ISO 9141 K-Line: one wire, half-duplex, 10400 baud 8N1.
  • The cable echoes every byte you send before the ECU answers. Strip it (exact copy, or a copy with bits only cleared when a valid reply follows).
  • Frame: [header][total length incl. checksum][service][args…][checksum]. Requests start 0x72 (or 0xFE for StartComm); replies start 0x02.
  • Checksum = (0x100 − (sum of bytes mod 256)) mod 256. A valid frame sums to 0 mod 256. A plain sum is wrong. Example: 72 07 72 17 00 0F → EF.

Session

  1. Wake: line LOW for 70 ms, timed atomically, then idle 130 ms.
  2. StartComm FE 04 72 8C (a reply is not required).
  3. Liveness: 72 05 00 F0 99, then 72 05 71 00 18, then 7E 06 01 01 00 7A. The first one that gets any reply means the session is up. Retry wake 1–3 up to 4 times.
  4. StartDiag 72 05 71 00 18 (required before the live tables answer).
  5. ECM-ID 72 07 72 00 00 05 10 → 02 0B 72 00 00 <5 bytes> ck. Up to 3 tries, 300 ms apart. Fall back to the ID inside the StartDiag reply.

Live data

Read 72 07 72 <table> 00 <count> ck and cut the data bytes from the last valid 02 L 72 <table> frame. Each field is raw × scale + add over big-endian bytes, with sentinels (absent), ranges (invalid), clamps, per-ECM-ID sources and fallback chains. Every value carries a provenance: bench / field / reference / provisional. Five layouts exist (t17.sub8 Keihin, t17.sub4 Shindengen, t13.type7, t11.type1, generic.t17). The SDK detects the layout by probing tables 0x17 → 0x13 → 0x11.

Fault codes (beta)

72 05 74 01/02/03 → 02 0C 74 <sub> <payload> ck. The payload is a 00 lead byte followed by (code, sub) pairs, read as Honda blink codes such as 7-1. Only Keihin boxes are decoded. If anything does not parse, the result is "unreadable", never a guess.

Next: Troubleshooting